Table of Contents
Advertisement
[Services]
Set the NTP, LPD, FTP, SFTP, SNMP, SOS (SATO Online Services), SATO App Storage, or SOTI
Connect Services.
The setting items are as follows:
[NTP]
Set the functions for NTP.
The NTP function gets the time information from the NTP server through the network and sets the time
of the product.
The setting items are as follows:
[Enable]
Enable or disable the functions for NTP.
The options are as follows:
Enabled
Enable the NTP function.
Disabled
Disable the NTP function.
[Error]
Set to show the NTP error message if detected.
The options are as follows:
Enabled
Shows the error message.
Disabled
Does not show the error message.
[Time Server IP]
Set the IP address of the NTP server.
The setting range is as follows:
0.0.0.0 to 255.255.255.255
The IP address should normally be set to 0.0.0.0 (the default value). For the default value, the global
NTP servers are assigned automatically. Set to a valid IP if the time synchronization is requested for a
specific server.
[LPD]
Set the functions for LPD.
•
This setting supports only the IPv4.
172
[Network]
Advertisement
Table of Contents
