SATO PW4NX Operator's Manual page 46

Icon Description
Dispenser sensor failed due to strong exterior light. To output the next media,
remove the media, and go to online mode.
Maintenance Status
Icons notify you about cleaning the product and replacing parts at the set periods when [Notifications]
is enabled.
Icon Description
Clean the print head or platen roller.
Replace the print head.
Replace the platen roller.
Battery Status (When [Eco Charge] is Disabled)
Icon Description
Shows the remaining battery level in an icon and percent.
Shows that the battery is charging.
Shows that the battery is not in a chargeable temperature range and cannot be
charged.
46
Status Icon