Mercedes-Benz EQE Operator's Manual page 140

138 Light and visibility
Switching on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch in the direction
#
of arrow 1.
When the high beam is activated, the indicator
lamp for low beam L will be deactivated
and replaced by the indicator lamp for high
beam K.
Switching off high beam
Push the combination switch in the direction
#
of arrow 1 or pull it in the direction of arrow
3.
High-beam flasher
Pull the combination switch in the direction of
#
arrow 3.
Turn signal indicators
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combina-
#
tion switch beyond the point of resistance in
the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
A turn signal indicator activated by the
R
driver may continue to operate for the
duration of the lane change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
Activating/deactivating the hazard warning lights
Vehicles without MBUX Hyperscreen