Mercedes-Benz EQE Operator's Manual page 366

364 Breakdown assistance
If necessary, set the system language
#
( page 307).
/
Observe the notes on towing away
#
( page 362).
/
Connect the towing device to the towing eye
#
in order to load the vehicle.
Switch on the power supply (
/
#
Shift the transmission to position i.
#
%
The transmission may be locked in position
j in the event of damage to the electrics. To
shift to i, provide the on-board electrical
system with power ( page 360).
/
Vehicles with AIRMATIC
* NOTE Possible damage to the vehicle
when loading or unloading
When loading or unloading, the vehicle must
be raised to transport level.
If the transport settings are not shown or the
Vehicle Not Ready for Loading message is
displayed, the vehicle may not be loaded or
unloaded.
If required, raise the vehicle to transport
#
level again.
A vehicle that cannot be raised to trans-
#
port level may not be loaded or unloaded
using a ramp. Consult a qualified special-
ist workshop.
page 173).
& WARNING Risk of accident due to activa-
ted transport level
If the vehicle is raised to transport level, driv-
ing and driving safety systems have only limi-
ted availability and the view from the vehicle is
restricted.
Driving safety is severely restricted and there
is a risk of an accident!
Do not use transport level in normal road
#
operation.
Only activate and use transport level to
#
load the vehicle and when not on public
roads.
Ensure that no persons or obstacles are
#
located in the area surrounding the vehi-
cle.
Raising the vehicle to transport level
Vehicles with AIRMATIC
Press the G button for at least five sec-
#
onds.
Immediately press and hold the a button
#
for at least one second.
For Transport Level Switch On Vehicle
The
message is displayed.
Select Vehicle Transport.
#