Mercedes-Benz EQE Operator's Manual page 113

Configuring the seat settings
Multimedia system:
© Comfort Seat
4 5 5
Adjusting the air cushions
On the corresponding menu, adjust the air
#
cushions for Lumbar, Shoulders
sters.
Setting the seat heating balance
Select Heating Settings.
#
Select Seat Heating Balance.
#
Adjust the heat distribution for the desired
#
seat.
%
The seat heating balance in the rear
passenger compartment can be set on the
Seat Climate Control menu.
Coupling neck heat to seat heating
Additional Neck Warmer.
Select
#
Switch the function for the desired seat on or
#
off.
If the function is active, the neck heat of the
additional cushion has been coupled to the
seat heating.
Setting automatic seat adjustment
or Side Bol-
& WARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat after
calling up a driver profile
Selecting a user profile may trigger an adjust-
ment of the driver's seat to the position saved
under the user profile. You or other vehicle
occupants could be injured in the process.
Make sure that when the position of driv-
#
er's seat is being adjusted using the mul-
timedia system, no people or body parts
are in the seat's range of movement.
If there is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
ately:
Seats and stowing 111
a) Tap the warning message on the cen-
#
tral display.
or
b) Press a memory position button or a
#
seat adjustment switch on the driver's
door.
The adjustment process will be stopped.
Multimedia system:
© Comfort Seat
4 5 5
Automatic Seat Positioning
5
Manually adjusting driver's seat and steering
wheel position to body size
The vehicle calculates a suitable driver's seat and
steering wheel position on the basis of the driver's
body size and sets this directly.
To set the unit of measurement: select
#
ft/in.
Set the size using the scale.
#
Select Start Positioning.
#
The driver's seat and steering wheel position
is adjusted to the body size that has been set.
cm or