Mercedes-Benz EQE Operator's Manual page 385

% The data shown in the image is example data.
The TIN is a unique identification number to iden-
tify tires and comprises the following:
DOT (Department of Transportation): tire sym-
R
bol marks 1 indicating that the tire complies
with the requirements of the US Department
of Transportation.
Manufacturer identification code: manufac-
R
turer identification code 2 contains details of
the tire manufacturer. New tires have a code
with two symbols. Retreaded tires have a code
with four symbols. Further information on
retreaded tires ( page 388).
/
3
Tire size: identifier describes the tire size.
R
Tire type code: tire type code 4
R
by the manufacturer as a code to describe
specific characteristics of the tire.
Manufacturing date: manufacturing date
R
provides information about the age of a tire.
The 1st and 2nd positions represent the cal-
endar week and the 3rd and 4th positions
state the year of manufacture (e.g. "3208"
represents the 32nd week of 2008).
Information on the maximum tire load
%
The data shown in the illustration is example
data.
Maximum tire load 1
ble weight for which the tire is approved.
can be used
Do not overload the tires by exceeding the speci-
fied load limit. The maximum permissible load can
be found on the vehicle's tire and loading informa-
5
tion placard on the B-pillar on the driver's side
( page 377).
/
Specifications for maximum tire pressure
%
The data shown in the illustration is example
data.
is the maximum permissi- Never exceed maximum tire pressure
fied for the tire. Always observe the recommen-
ded tire pressure for your vehicle when adjusting
the tire pressure (
Wheels and tires 383
1 speci-
page 373).
/