366 Breakdown assistance
* NOTE Damage to the drive train due to
incorrect positioning of the vehicle
Do not position the vehicle above the
#
connection point of the transport vehi-
cle.
Unloading the vehicle
Vehicles with AIRMATIC
Make sure that the vehicle is raised to trans-
#
port level before unloading .
Lowering the vehicle after unloading
Switch on the power supply.
#
Switch on the vehicle.
#
Swipe up in the transport settings to select
#
the
Standard Level
and press a.
The vehicle is adjusted to the height of the last
Lowering Vehicle...
active level and the
sage is displayed.
After the vehicle has been lowered, press the
#
G button for at least two seconds.
The transport settings are closed.
Towing eye storage location
Towing eye
1
is located under the trunk floor.
mes-
Installing and removing the towing eye