Mercedes-Benz EQE Operator's Manual page 187

Selecting the drive program
Press DYNAMIC SELECT button 1
#
or right.
The drive program selected appears on the
driver's display.
Configuring DYNAMIC SELECT (multimedia sys-
tem)
Multimedia system:
© Settings
4 5
DYNAMIC SELECT
5
Setting drive program I
Select = Individual.
#
Select and set a category.
#
Switching the reset display on/off
Switch Request at Start
#
%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is only
stored if this function is activated.
on the left Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the A drive program is set automatically.
Displaying vehicle data
Vehicle
5
Multimedia system:
©
4
Select Vehicle.
#
The vehicle data is displayed.
Calling up the fuel consumption indicator
on or off .
Multimedia system:
©
4
Select Consumption.
#
The current and average fuel consumption will
be displayed.
Driving and parking 185
Info
5
EQ
5