Mercedes-Benz EQE Operator's Manual page 249

Hide thumbs Also See for EQE:
Table of Contents

Advertisement

A set turn signal left or right and lane recommen-
dations during active route guidance are taken
into account for the display.
The service is for information purposes only and is
not linked to any other vehicle functions, systems
or components. Please note that the displayed
data is not available in all traffic areas and may be
incorrect.
Certain light signal systems automatically adapt
their switching times to the current traffic situa-
tion. This can lead to a sudden change in the
countdown display.
The driver's display is shown after selecting the
Assistancemenu . If another menu is selected, the
traffic light countdown is not displayed.
Also observe the following information:
Select a speed adapted to the traffic, sur-
R
roundings and weather conditions
Observe actual traffic signs
R
Observe applicable traffic rules and regula-
R
tions
Please observe the notes on driving systems and
your responsibility. You could otherwise fail to rec-
ognize dangers.
System limits
The display does not appear in the following situa-
tions, for example:
There is no traffic light data available.
R
The time remaining until the next green phase
R
is less than ten seconds.
Emergency vehicles or local public transport
R
are located in the vicinity of the intersection.
The data transmission from the vehicle has
R
been interrupted.
Light signal systems are located in a construc-
R
tion site area or are being maintained.
The light signal system is malfunctioning.
R
The subscription to the service has expired.
R
Driving and parking 247
Blind Spot Assist and Active Blind Spot Assist
▌Function of Blind Spot Assist and Active Blind
Spot Assist with exit warning
Blind Spot Assist and Active Blind Spot Assist use
radar sensors to monitor the area up to 130 ft
(40 m) behind and 10 ft (3 m) next to your vehicle.
The system can detect vehicles traveling from
speeds of approximately 8 mph (12 km/h) and
issue a warning if they move into the monitoring
range.
Status display in the driver's display
¸ Gray: the system is activated but inopera-
tive.
¸ Green: the system is activated and opera-
tional.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents