Software Versioning; Software Updates; Startup And Factory Default Conditions; Plc Interfaces - Spectrum Controls Micro850 User Manual

Column
Min
Max

3.3.1 Software Versioning

3.3.2 Software Updates

3.3.3 Startup and Factory Default Conditions

Parameter
Vendor ID
Product Type
Product Code
Series
Module Catalog Number
Module Feature Code
Interrupts
Distance Rating
Input Data Type
Output Data Type
Parameter
Chapter 3: Configuring the 2085sc-IF16 Using CCW
Description
The minimum value is the lowest possible value for this parameter.
The maximum value is the highest possible value for this parameter.
The software version tracks major and minor revisions for end users. The shipped
software version begins at version 1.1. Once released, the major revision is
typically incremented if new features are introduced to the product. Otherwise
only the minor revision is incremented.
In-field updating of the software by the end user is not supported.
After the module boots and before the initial configuration is received, the
modules run with default configurations as specified in the PLC Interfaces.
 The default configuration for the IF16C is for all channels enabled in the 4-
20 mA range with the 17 Hz filter in Engineering ×1 units.
 The default configuration for the IF16V is for all channels enabled in the ±10
V range with the 17 Hz filter in Engineering ×1 units.

3.3.4 PLC Interfaces

The 2085 platform treats all data on an I/O module as a member of a named
Array of Words.
Module Identity
The following values will be stored in the Vendor ID, Product_Type,
Product_Code, Series_Rev, and Mod_Features arrays:
2085sc-IF16C
58 (Spectrum Controls)
10 (Analog)
112
A
2085sc-IF16C
0 [0×00]
Not Supported
8
16-bit Signed Integer
16-bit Collection of Bits
IF16C
2085sc-IF16V
58 (Spectrum Controls)
10 (Analog)
111
A
2085sc-IF16V
0 [0×00]
Not Supported
8
16-bit Signed Integer
16-bit Collection of Bits
IF16V
User's Manual Pub. 0300306-01 Rev. A
3-9