Section 1.2 Input Specifications - Spectrum Controls Micro850 User Manual

Section 1.2
Input Specifications
Table 1-1 Input/Performance/Environmental Requirements
Input Description
Operating Temperature
Storage/Non-Operating
Temperature
Operating Humidity
Storage/Non-Operating Humidity
Vibration/Operating
Operating Shock
Storage/Non-Operating Shock
Pollution Level
ESD
Radiated Immunity
Inputs per module
Input ranges
Input filters
Current accuracy
(4 and 17 Hz filters)
0-20 mA
4-20 mA
Voltage accuracy
(4 and 17 Hz filters)
0-5 V
0-10 V
The 2085sc-IF16C/2085sc-IF16V modules have the following input
specifications:
-20 ºC to 65 ºC (-4 ºF to 149 ºF)
-40 ºC to 85 ºC (-40 ºF to 203 ºF)
5% to 95%, non-condensing
5% to 85%, non-condensing
10 Hz to 500 Hz, 2 g, 0.030 max peak-to-peak
25 g, peak acceleration, 11±1 ms pulse, half sine
25 g peak acceleration, 11±1 ms pulse, half sine; 35 g for panel
mount.
Meets Pollution Degree 2 requirements.
Meets CE requirements for operating ESD category B at 6 kV
indirect (coupling plate).
10 V/M with 200 Hz square-wave 50% Pulse 100% AM at 900
MHz and at 1890 MHz
10 V/M with 1 kHz sine-wave 80% AM from 80...2000 MHz
20 V/M with 1 kHz sine-wave 80% AM from 2000...6000 MHz
16 current or voltage differential input channels
Current:
0-20 mA, 4-20 mA
Voltage:
0-5 V, 0-10 V, ±10 V
4 Hz, 17 Hz, 60 Hz, 470 Hz
Error at 25 °C, Max
Error at 25 °C, Max
Chapter 1: Module Overview
Value
Error over -20 °C to 65 °C, Max
±20 µA
±20 µA
Error over -20 °C to 65 °C, Max
±3 mV
±10 mV
User's Manual Pub. 0300306-01 Rev. A
1-3
±50 µA
±50 µA
±6 mV
±20 mV