Table of Contents
Advertisement
3 Configuration
Accessories
3-2-2
Component Names and Functions
1
2
FHV-SDU10 Front
No.
1
Smart Camera connector
2
Power supply and grounding terminals
3
I/O indicator
4
Parallel I/O connector
5
DIN rail mounting
6
Slider
7
Address setting volume for EtherCAT
3-14
Item
•
Instruction sheet: 1
•
Compliance sheet: 1
3
4
FHV-SDU10 Back
Name
POWER
ERROR
RUN
BUSY
CAMERA
OR
Parallel
interface
5
6
Connects the FHV series. (Special cable: FHV-
VU£)
Connects 24 VDC power supply and grounding
lines.
Lights green while the power is supplied.
Lights Red when an error occurs.
Lights green when the RUN signal output is
switched to a layout set to ON.
Lights green while the Smart Camera is proc-
essing.
Blinks yellow while the Smart Camera is prepar-
ing to connect. Lights yellow while the Smart
Camera is connected.
Lights yellow when the overall judgment result is
ON.
Connects external devices such as a synchro-
nizing sensor or a programmable controller.
Fits into the DIN rail on the body.
Uses this to fix the body to the DIN rail.
Uses to set an address (00 to 255) as an Ether-
CAT communication device.
FHV Series Smart Camera Setup Manual (Z408-E1)
EtherCAT
interface
9
7
8
FHV-SDU30 Front
Description
Advertisement
Table of Contents
