5 Installation
2
Attach the lens module to the Smart Camera body.
Precautions for Correct Use
• Ensure that there is no foreign matter on the surface of the image sensor before attaching it.
• Connect the lens module to the (black) lens module connector of the Smart Camera.
• Tighten the screws in order of 1 to 4 as shown in the figure below.
• Tightening torque: 0.15 N·m
Connector for
lens module (black)
Fixing screws
(M2 Phillips-head
anti-falling screws)
3
Attach the FHV-LEM-H.
5-12
C mount cover
M3x8 screws
Lens module
1
3
4
2
FHV Series Smart Camera Setup Manual (Z408-E1)