Omron Sysmac FHV Series Setup Manual page 224

7 Software Setup
Precautions for Correct Use
If no version of a simulator to match the configuration file exists, a message of No version of a
simulator to match the configuration file is installed. will appear.
4
The matched version of a simulator with the configuration file will appear.
5
Click Run.
Launching the Remote Operation Tool
1
Click Remote Operation Tool.
2
Specify the version if it has already been known.
All software versions installed in the PC will be displayed.
3
When data for Sensor controller project, System + Scene group 0, Scene group, Scene, and
Unit exist, the version of software to launch can be checked by specifying data.
• Check the check box of Select version from file.
• Specify a file.
Item
Select version
from file
Configuration
file
Precautions for Correct Use
If no version of a simulator to match the configuration file exists, a message of No version of a
simulator to match the configuration file is installed. will appear.
7-6
Setting value
Factory default
•
[Unchecked]
•
Checked
•
[Sensor controller project]
•
System +Scene group 0,
Scene group, Scene, Unit
Description
Checks this when checking the version from file.
Sensor controller project:
Selects this when checking the version of simula-
tion software with data generated by the environ-
ment copy function.
System +Scene group 0, Scene group, Scene,
Unit:
Selects this when checking the version of simula-
tion software by using data like System +Scene
group 0, Scene group, Scene, and Unit.
FHV Series Smart Camera Setup Manual (Z408-E1)