Table of Contents
Advertisement
7 Software Setup
Click Browse to check the IP addresses and Line No. for connectable Smart Camera.
* The Line No. selected here is one of the following based on the system's operation mode.
Standard
Double Speed Multi-input
Non-stop adjustment
If a Line No. other than the above was selected, the remote operation cannot be connected to
Sensor Controllers.
7
Change the size of an image to transfer with the remote operation as necessary. Select (
set.
7-16
Operation mode
Measurement window
Non-stop adjustment window
Setting
Line No. = 0
Line No. = 0
Line No. = 0
Line No. = 1
FHV Series Smart Camera Setup Manual (Z408-E1)
) to
Advertisement
Table of Contents
