Waterproof
packing
1
4
3
Attach the waterproof packing and hood cover.
Using the same hexagon wrench, tighten the screws in the order shown below.
Tightening torque (M2.5 Hexagon screw): 0.3 N·m
Precautions for Correct Use
• Place the waterproof packing along the groove of the Smart Camera, being careful not to
twist it.
• Pass the hexagon wrench included with the waterproof hood through the holes and tighten
the screws in order of 1 to 4 as shown in the figure below.
• Recommended tightening torque (M3 Hexagon socket screw): 0.54 N·m
FHV Series Smart Camera Setup Manual (Z408-E1)
3
2
5 Installation
Hood base
5
5-9