Omron Sysmac FHV Series Setup Manual page 167

Please attach the lighting module following these procedures.
1
Attach the lens module.
For more detailed information on the lens module, please refer to 5-1-3 Standard Lens Mod-
ule / IP40 Configuration on page 5-5.
2
Attach the waterproof packing (small).
Precautions for Correct Use
Place the waterproof packing along the groove of the Smart Camera, being careful not to twist
it.
Waterproof packing (small)
3
Connect the harness of the lighting module to the lighting module connector (white) of the
Smart Camera.
Precautions for Correct Use
• Do not pull or stress the harness when attaching.
• Hold the connector part of the harness and attach/detach the lighting module.
• Take care that the harness does not catch on, or get pinched between any parts of the case
when assembling.
Lighting module
FHV Series Smart Camera Setup Manual (Z408-E1)
Harness
5 Installation
5
5-17