Omron Sysmac FHV Series Setup Manual page 237

• This simulation software can load scene data and system data generated with FHV series. Likewise,
scene data and system data generated with the simulation software can be used with FHV series.
However, regarding a setting including "path" (logging setting or capture setting case), the path
name may differ on the FHV series, it may require re-set.
• Different memory capacity does not allow FHV series to load data generated by the simulation soft-
ware.
Reconsider the settings and scenes and reduce the necessary memory amount, then
load them again.
• As same as the above issue, FHV series can load scene data with many processing units related to
image input and image conversion due to the memory amount difference, but the simulation soft-
ware may not load and measure the data because of NG (insufficient memory). Reconsider the
scene contents and reduce the necessary memory amount, then load them again.
FHV Series Smart Camera Setup Manual (Z408-E1)
7 Software Setup
7
7-19