LAVAZZA AMODO MIO Instructions For Use Manual page 13

1
ATTACHING STEAM ARM SUPPORT TO MACHINE
If space allows, the machine support can be fixed to the machine.
1
Insert the steam arm into the support and remove the protective film from the double-
1
sided tape.
Position correctly on the right side of the machine so that the tip of the steel steam
2
spout is at least 1 cm from the worktop.
Affix the support to the machine in the chosen position.
3
CONNECTING TO LAVAZZA A MODO MIO MACHINE
1
Insert the black cylindrical rubber that comes with the Cappuccinatore and push up-
1
wards.
Lightly applying pressure, insert the end of the transparent steam spout into the steam
2
arm of your Lavazza A MODO MIO machine.
Pull the black cylindrical rubber downwards so it covers the tip of the transparent steam
3
spout connected to the machine steam arm.
Risk of burning! The steam arm/hot water can reach high temperatures. Make sure it has
cooled down before attaching the steam spout.
MOUNTING THE CAPPUCCINATORE
2
2
2
E N
Insert the frother arm
1
into the power unit.
Lightly apply pressure
to ensure it is fixed in
place.
Insert the cup into the
2
cup base.
3
3
11