Unit Configuration" (Units); Buttons On Product" (Enable/Disable Settings); Delete History; Define Home Display - Grundfos TPE 1000 Series Installation And Operating Instructions Manual

Related information
30. Factory settings

13.27 "Unit configuration" (Units)

Pump variant
TPE, TPED, NBE,
NBGE, NKE, NKGE
TPE, TPED, NBE, NKE
Series 2000
In this menu you can select between SI and US units.
The setting can be made generally for all parameters
or customised for each parameter.
Factory setting
See section Factory settings.
Related information
30. Factory settings
13.28 "Buttons on product" (Enable/disable
settings)
Pump variant
TPE, TPED, NBE,
NBGE, NKE, NKGE
TPE, TPED, NBE, NKE
Series 2000
In this display, you can disable the possibility of
making settings.
Grundfos GO
If you set the buttons to "Not active", the buttons on
the standard control panel are disabled. If you set the
buttons to "Not active" on pumps with an advanced
control panel, see below.
Advanced control panel
If you have disabled the settings, you can still use the
buttons to navigate through the menus but you
1
cannot make changes in the Settings menu.
When you have disabled the possibility to make Setpoint
5.00 bar
settings, the symbol appears in the display.
Operaring mode
Normal
The button always remains active but you can only
unlock all other buttons on the pump with Grundfos
GO.
Factory setting
See section Factory settings.
Related information
30. Factory settings
56
"Unit configuration"
●
●
"Buttons on product"
●
●
2 3
Status Settings Assist
Control mode
Const. pressure
Actual controlled value
4.90 bar
9 8 7 6 5

13.29 Delete history

Pump variant
TPE, TPED, NBE,
NBGE, NKE, NKGE
TPE, TPED, NBE, NKE
Series 2000
In this menu, you can delete the following historic
data:
• "Delete operating log".
• "Delete heat energy data".
• "Delete energy consumption".

13.30 Define Home display

Pump variant
TPE, TPED
NBE, NBGE, NKE,
NKGE & TPE, TPED,
NBE, NKE Series 2000
This menu is only available in the advanced control
panel.
In this menu, you can set the Home display to show
up to four user-set parameters.

13.31 Display settings

Pump variant
TPE, TPED
NBE, NBGE, NKE,
NKGE & TPE, TPED,
NBE, NKE Series 2000
This menu is only available in the advanced control
panel.
In this menu you can adjust the display brightness
and set whether or not the display is to turn off if no
buttons have been activated for a period of time.
13.32 "Store settings" (Store actual
settings)
Pump variant
TPE, TPED, NBE,
NBGE, NKE, NKGE
TPE, TPED, NBE, NKE
Series 2000
Delete history
-
-
Define Home display
-
●
Display settings
-
●
"Store settings"
●
●