Radio Communication" ("Enable/Disable Radio Comm."); Language; Date And Time" ("Set Date And Time"); Unit Configuration" ("Units") - Grundfos CRE Installation And Operating Instructions Manual

8.25 "Radio communication" ("Enable/disable radio
comm.")
"Radio communication" ("Enable/
Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
You can set the radio communication to either enabled or disabled.
You can use this function in areas where radio communication is not
allowed.
IR communication remains active.
Factory setting
See the section on factory settings.
Related information
9.2 Factory settings

8.26 "Language"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced operating panel.
In this menu, you select the desired language. A number of
languages is available.
Factory setting
See the section on factory settings.
Related information
9.2 Factory settings

8.27 "Date and time" ("Set date and time")

Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
The availability of this menu depends on the functional module fitted
in the pump:
Function (terminal)
"Date and time"
1) See the section on the identification of functional module.
You can set date and time as well as how you want them to be
viewed in the display:
• "Select date format":
"YYYY-MM-DD"
"DD-MM-YYYY"
"MM-DD-YYYY".
• "Select time format":
"HH:MM 24-hour clock"
"HH:MM am/pm 12-hour clock".
disable radio comm.)
●
●
"Language"
●
●
"Date and time"
("Set date and time")
●
●
1) 1)
FM 200 FM 300
(standard) (advanced)
- ●
• "Set date"
• "Set time".
Factory setting
See the section on factory settings.
Related information
3.2.2 Identification of functional module
9.2 Factory settings

8.28 "Unit configuration" ("Units")

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
In this menu, you can select between SI and US units. The setting
can made generally for all parameters or you can customize for
each parameter.
Factory setting
See the section on factory settings.
Related information
9.2 Factory settings

8.29 "Buttons on product" ("Enable/disable settings")

Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
In this display, you can disable the possibility of making settings for
protective reasons.
Grundfos GO Remote
If you set the buttons to "Not active" the buttons on the
standard operating panel are disabled. If you set the buttons to "Not
active" on pumps fitted with an advanced operating panel, see
below.
Advanced operating panel
If you have disabled the settings, you can still use the buttons to
navigate through the menus, but you cannot make changes in the
"Settings" menu.
When you have disabled the possibility to make settings, the
symbol appears in the display
Advanced operating panel:
To unlock the motor and allow settings, press
simultaneously for at least 5 seconds.
Standard operating panel:
The button always remains active but you can only
unlock all other buttons on the motor with Grundfos
GO Remote.
Factory setting
See the section on factory settings.
Related information
9.2 Factory settings
"Unit configuration"
("Units")
●
●
"Buttons on product"
("Enable/disable settings")
●
●
1 2
Status Settings
Setpoint Control mode
5.00 bar Const. pressure
.
Operaring mode Actual controlled value
Normal
4.90 bar
and
9 8 7 6 5
53
3
Assist