Setting Or Changing Seal Only Mode - Pitney Bowes SendPro HVF1 User Manual

Setting or changing Seal Only mode

Use Seal Only mode to seal envelopes without printing anything on the envelope.
Set Seal Only mode
Use Seal Only mode to seal envelopes without printing anything on the envelope.
1. Select Run Mail from the Home screen.
2. Select Sealer.
3. Select Seal only, no Printing.
4. Select OK.
Exit Seal Only mode
1. Select Sealer.
2. Select Exit seal only mode.
3. Select OK.
Pitney Bowes User Guide January 2023
Sealing
73