Advertisement
Quick Links
SendPro
Installation Instruction
1E42
Read Now BEFORE you unpack your equipment
If you are installing your Printer on a Mac
please
Click Here.
Continue reading below
Right, let's get your Printer up and
running quickly...
Let's start by opening and unpacking the box that contains your SendPro
1E42 Printer on the next page.
Printer
®
®
Advertisement
Related Manuals for Pitney Bowes SendPro 1E42
Summary of Contents for Pitney Bowes SendPro 1E42
- Page 1 SendPro Printer ® Installation Instruction 1E42 Read Now BEFORE you unpack your equipment If you are installing your Printer on a Mac please Click Here. Continue reading below Right, let’s get your Printer up and running quickly… Let’s start by opening and unpacking the box that contains your SendPro ®...
- Page 2 Opening the box and unpacking Here’s a diagram and explanation of the items you should find in your box. Please select the correct power cable for your location. If you have any problems during this installation, refer to the online help available. Printer Network Cable (for network...
-
Page 3: Test Print
Aligning the Label Roll Press the button and check that the label feeds out correctly. Note- If the label does not feed correctly please refer to label alignment instructions inside the printer top cover. Tear off the correctly dispensed label. Connecting the USB Cable Connect your printer to your computer with the USB cable. -
Page 4: Printing A System Report
5 . Connecting the Printer via Network Connect your Network cable to your printer and Network socket. Ensure you have the correct power cord for your region. Connect the power cord and adapter (as shown) to your printer and switch on. Network Cable Power Cable Printer Ready... -
Page 5: Connecting To The Printer
Downloading the Printer Driver Ensure you are signed into SendPro and click on the Help icon. ® Select the Datamax Printer Driver Select the correct printer driver for your operating system. Select Run or Open dependant on your browser. Accept the licence agreement and follow the on screen prompts to install. Connecting to the Printer Select Network and press Next. - Page 6 Printer Port Wizard Select Next to run the Printer Port Wizard. Enter the Ethernet IP from the system report printed in step 8 and Select Next. Note- The Port Name will automatically be populated with a default value. Windows Wizard will automatically find the device. If not found, Select Generic Network Card from the drop down menu and Select Next.
- Page 7 Completing Printer Setup Select Finish to complete the wizard and begin using your printer. Test Print Your Printer is now connected. To test your printer is working correctly follow the steps below- On a PC Go to your Control Panel Select Device &...
- Page 8 Follow normal safety precautions for all office equipment: • Use only Pitney Bowes approved supplies, in particular aerosol dusters. Improper storage and use of aerosol dusters or flammable aerosol dusters can cause an explosive-like condition that could result in personal injury and/or property damage.