13. AUTOMATION SETUP
13.7. Automation setup for USL DAX devices
The SR-1000 supports automation for USL DAX sound processor. Follow the steps below to
configure a USL DAX device in the server automation interface.
1. Under the Automation tab in the menu, click the Device sub-tab.
2. Under the
Device
3. Select 'USL-DAX' as the device Type. Enter the
4. Enter the
IP Address
5. Click
Save
to save the settings.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
list on the left, click on the
of the USL DAX device.
Figure 43: USL DAX device setting
Create
button.
Name
of the USL DAX device and click OK.
- 40 -
nd
December 22
, 2022