Table of Contents
Advertisement
5. SR-1000 WEB UI ACCESS
5. SR-1000 WEB UI ACCESS
The SR-1000 uses a web-based user interface. The following steps show how to access the
SR-1000 Web UI:
1. Assuming the SR-1000 is using its default IP Address, which is 192.168.1.12, connect a
laptop/PC to the Gigabit 2 network port of the SR-1000. Configure the laptop/PC to the
same network as the SR-1000.
2. The SR-1000 Web UI can be accessed by a web browser (Google Chrome™ or
Mozilla Firefox™ are recommended).
3. Enter the IP address of the SR-1000 in the web browser, to access the login page on
the Web UI.
4. There are three levels of users available (User/Technician/Maintenance). Select the required
access level and enter the corresponding password to login to the Web UI.
5. Select the preferred UI language by clicking on the corresponding flag icon, as
shown in Figure 13.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
Figure 13: SR-1000 Web UI Login Page
- 17 -
nd
December 22
, 2022
Advertisement
Table of Contents
