Automation Setup For Usl Dax Devices - GDC SX-2000 Installation Manual

5. Click the [Save] button to save configured settings.
3.3.10

Automation setup for USL DAX devices

The SX-2000 server supports automation for USL DAX sound processor. Follow the steps below
to configure a USL DAX device in the server automation interface.
1. Click the [Add] button on the [Devices] tab and enter the name of the device. In this
case, it is "DAX". Set the device type to "USL-DAX" (see Figure 44).
2. Click [OK] and set up the device parameters for the USL DAX device.
GDC Technology Ltd.
SX-2000 Installation Manual
Figure 42 Dolby CP650 automation device setup
Figure 43 Automation settings for Dolby CP650 device
11/8/2010
Page 38 of 42