Table of Contents
Advertisement
6. SR-1000 NETWORK SETUP
6. If all of the IP addresses are valid, a popup window will appear, as shown in .
7. Click
OK
to exit and then
NOTE:
The SR-1000 IMB IPs may be changed to a cinema-specific IP scheme, keeping in
mind the following rules:
•
All IP Addresses must be unique.
•
The
IMB Ethernet 2
•
The
IMB Ethernet 1
one IP Address must be allocated for each SR-1000 IMB on the cinema's content network.
•
Assigned IP Addresses should not conflict with other devices in the cinema's network
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
Save
to save these settings.
Figure 15: IMB Network Configuration (2)
and
IMB Ethernet 1
must be on separate subnets.
IP must be configured as per the cinema's content network. Therefore,
- 19 -
nd
December 22
, 2022
Advertisement
Table of Contents
