Table of Contents
Advertisement
8. SERIES 2 PROJECTOR SETUP
4. Select [Menu] → [Administrator Setup] → [Content Devices Configuration] (as shown
in Figure 25).
5. Select [GDC] for the [IMB Installed] (as shown in Figure 26).
6. Clear the Service Door/Marriage Tamper on the SR-1000.
To use the SR-1000 for content playback, the INPUT for projector channel must be set to
[IMB-Generic].
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
Figure 25: Content Devices Configuration
Figure 26: Content Devices Configuration
- 26 -
nd
December 22
, 2022
Advertisement
Table of Contents
