13. AUTOMATION SETUP
13.6. Automation setup for Dolby devices
The SR-1000 supports automation for the Dolby sound processors. Follow the steps below to
configure a Dolby device in the server automation interface. For this example, the device refers
to the Dolby CP650 Cinema Processor.
1. Under the Automation tab in the menu, click the Device sub-tab.
2. Under the
Device
3. Select 'DolbyCP650' as the device Type. Enter the
and click OK.
4. Enter the
IP Address
5. Click
Save
to save the settings.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
list on the left, click on the
of the Dolby CP650 device.
Figure 42: Dolby device setting
Create
button.
Name
of the Dolby CP650 device
- 39 -
nd
December 22
, 2022