Table of Contents
Advertisement
13. AUTOMATION SETUP
13.4. Automation setup for JNIOR devices
The SR-1000 supports the JNIOR Ethernet I/O controller device. Follow the steps below to
configure a JNIOR device in the server automation interface.
1. Under the Automation tab in the menu, click the Device sub-tab.
2. Under the
Device
3. Select 'JNIOR_IO' as the device Type. Enter the
4. Enter the
IP Address
5. The settings for Port,
if left empty.
6. Click
Save
to save the settings.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
list on the left, click on the
of the JNIOR device.
Login
and
Password
Figure 40: JNIOR device setting
Create
button.
Name
of the JNIOR device and click OK.
are set to the default values for JUNIOR device,
- 37 -
nd
December 22
, 2022
Advertisement
Table of Contents
