Table of Contents
Advertisement
3.CONNECTING PORTABLE STORAGE/ENTERPRISE STORAGE WITH THE SR-1000
2.1. Remove existing interface board/placeholders from
the Projector
Before installing the SR-1000, check the sections below to ensure proper placement.
2.1.1. Barco Projector Placement
Figure 3 shows an interface board (with SMPTE 292 inputs) connected to a Barco projector.
This board must be removed in order to install the SR-1000, as shown in Figure 4.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
Figure 3: Remove interface board from Barco Projector
Figure 4: SR-1000 Placement on Barco Projector
- 10 -
nd
December 22
, 2022
Advertisement
Table of Contents
