Installing The Sr-1000 Into The Projector; Projector Network - GDC Standalone IMB SR-1000 Installation Manual

3.CONNECTING PORTABLE STORAGE/ENTERPRISE STORAGE WITH THE SR-1000

2.2. Installing the SR-1000 into the Projector

Please make sure the projector is powered off before installing the SR-1000 on the projector.
NOTE: Please check the SR-1000 for any physical damage like loose or burnt component
before installing it into the projector.
Insert the SR-1000 into the projector's IMB slot, as shown in Figure 7. The SR-1000 should
slide into the projector on the rails provided by the IMB slot, and the SR-1000 faceplate should
be flush with the other existing faceplates once properly inserted.

2.3. Projector Network

Connect the provided Cat 5e LAN cable from the SR-1000 Gigabit 2 network port to cinema
network. Please see Section 6 for IP network instructions after the SR-1000 is installed.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
Figure 7: Installing the SR-1000 into the Projector
- 12 -
nd
December 22 , 2022