Table of Contents
Advertisement
13. AUTOMATION SETUP
13.3. Automation setup for eCNA devices
The SR-1000 supports the eCNA-10 automation system. Follow the steps below to configure
an eCNA device in the server automation interface.
1. Under the Automation tab in the menu, click the Device sub-tab.
2. Under the
Device
3. Select 'eCNA_IO' as the device Type. Enter the
4. Enter the
IP Address
5. The eCNA device has many cues available for automation. These cues can be enabled or
disabled by selecting them in the
event report
fields. All cues are disabled by default.
6. Click
Save
to save the settings.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
list on the left, click on the
of the eCNA device.
Server
events,
Figure 39: eCNA device setting
Create
button.
Name
of the eCNA device and click OK.
eCNA
controls,
eCNA status
- 36 -
and
eCNA
nd
December 22
, 2022
Advertisement
Table of Contents
