Component Enginnering Ta-10 Setup - GDC Standalone IMB SR-1000 Installation Manual

14. COMPONENT ENGINNERING TA-10 SETUP

14. COMPONENT ENGINNERING TA-10 SETUP
The Component Engineering TA-10 can be used for theater automation with the SR-1000.
It requires that the TA-10 be wired in a particular configuration. A wiring diagram can be seen
in Figure 46.
The TA-10 is connected to the SR-1000 using the server's GPIO input/output port. Configure
event labels with the GPIO device to trigger the TA-10.
Figure 46: Component Engineering TA-10 wiring diagram
nd
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™ December 22 , 2022
- 43 -
INSTALLATION MANUAL