Troubleshooting
General Fault Isolation
Refer to your system's Operator's Manual, Chapter 2, "Equipment Overview" to
verify operation of the device.
Power Up Self-Test
On power-up, the system automatically runs an internal self-test. If all tests pass,
you see the following start-up screen.
The next screen to open depends on the Power Up mode selected in System
Configuration. The Resting ECG mode is the default Power Up mode.
If the equipment is not working properly, consider the following:
• Is the unit turned on?
• Have there been any changes in the use, location, or environment of the equipment
that could cause the failure?
• Has the equipment hardware or software been modified since the last use?
• Is operator error the cause of the problem?
Try to repeat the scenario exactly and compare that to the proper operation of the
equipment described in the manual.
2028451-183E
MAC™ 1600
3
29