Troubleshooting Connections - GE Healthcare Optima XR200amx Installation Manual

GE H
EALTHCARE
D 5336113-1EN, R
IRECTION
Table 4-8
Authentication type
Static WEP (Shared Key
authentication)
WPA TM -Personal (PSK)
WPA TM -Enterprise (EAP)
WPA2 TM -Personal (PSK)
WPA2 TM -Enterprise (EAP)
WPA2 TM -Enterprise (EAP)
5.
6.
7.
8.

4.2.6.4 Troubleshooting connections

If you try to connect in an enterprise situation, it will continue to try to connect until you tell it to stop
by selecting DISCONNECT.
10
EVISION
Some fields are auto-populated. Depending on the type of authentication, complete the other
required information, as described in the table below:
• WEP keys
• Encryption (if different than TKIP)
• PSK
• Encryption (if different than TKIP)
• Identity
• Password
• Client certificate
• Inner Auth
• Private key file
• Private key password
• PEAP version (only if EAP method is set to PEAP)
• Encryption (if different than TKIP)
• PSK
• Encryption (if different than CCMP)
• Identity
• Password
• Client certificate
• Inner Auth
• Private key file
• Private key password
• PEAP version (only if EAP method is set to PEAP)
• EAP-TLS
Click ADD.
Select the Networks tab, and verify that the network is listed.
Select the Current Status tab, and click CONNECT. Verify successful connection message.
To verify connectivity:
a. Select FILE > TOOLS.
b. Enter the IP of the machine you want to ping.
c. Press START PING and check for messages verifying connectivity.
d. Press STOP PING.
Chapter 4 Configuration
Required fields
O XR200 /XR220
PTIMA AMX
I M
NSTALLATION ANUAL
No FIPS FIPS ON
Y N
Y N
Y N
Y Y
Y N
N Y
Page 63
AMX