Table of Contents
Advertisement
•
Solvent(s)
•
Detector settings (sensitivity and wavelength)
•
Type and serial number of column(s)
•
Sample type
•
Empower or MassLynx software version and serial number
•
Workstation model and operating system version
For complete information on reporting shipping damages and submitting
claims, see Waters Licenses, Warranties, and Support Services.
Maintenance considerations
Safety and handling
Observe these warning and caution advisories when you perform maintenance
on your detector.
Warning:
when you handle solvents, change tubing, or operate the system. Know
the physical and chemical properties of the solvents you use. See the
Material Safety Data Sheets for the solvents in use.
Warning:
No user-serviceable parts are inside.
Caution:
• To avoid damaging electrical parts, do not disconnect an electrical
assembly while power is applied to the detector. To completely
interrupt power to the detector, set the power switch to Off, and then
unplug the power cord from the AC outlet. After power is removed,
wait 10 seconds before you disconnect an assembly.
• To prevent circuit damage from static charges, do not touch
integrated circuit chips or other system instruments that do not
require manual adjustment.
To prevent injury, always observe good laboratory practices
To avoid electric shock, do not remove the detector's top cover.
Maintaining the detector
35
Advertisement
Table of Contents
Troubleshooting
