AC Cable Routing
Caution: Follow all local codes and practices when performing the steps to connect ac to the power
system.
Step
1
Clearly label the main AC circuit breaker panel, stating that installers are working in the AC cabling.
2
Check that all AC circuit breakers are turned OFF.
3
Route the AC cables to the cabinet as required by local building codes.
4
At the cabinet, route the AC cables through the access holes in the top of the cabinet.
5
Install terminal lugs (if applicable) to cables.
Connecting AC Conduit
Page 57
© Copyright 2021 ABB. All rights reserved.
AC Cable Routing
Action
Figure 7-1: Attaching AC Conduit
Qty
Conduit
9
1"
4
1-1/2"
4
2"