Table of Contents
Advertisement
Bottom Cable Feed Options for GPS 4848/100 Systems
Standard cabinets are designed so that AC, battery, and DC load cables are routed through the top of
the cabinet, as a top-feed system, However, cabinets, using the ED83142-30 G26 AC panel, can also, be
configured as a bottom-feed system, with the cabling routed through the bottom of the cabinet (See
Figure 7-22). For the AC inputs from the bottom of the cabinet, this panel has a 2-inch diameter hole in
the back of its chassis to accept a 90° conduit fitting. Suffixes added to the "G26" indicate the cabling
arrangements as listed below:
AC
Panel Suffix
B
C
Page 86
© Copyright 2021 ABB. All rights reserved.
AC
Through bottom of cabinet
Through bottom of cabinet
Through top of cabinet
Figure 7-22: Bottom Cable Feed Option for GPS4848/100
Cabling Arrangement
Through bottom of cabinet
Through bottom of cabinet
Battery and DC Load
Through top of cabinet
Advertisement
Table of Contents
