Installation
Procedure
1. Carefully lower the cabinet on the
foundation. Refer to section
sure that the holes in the cabinet (A)
and the foundation (B) are aligned.
2. Install the fasteners (C).
3. Tighten the fasteners.
5.6
Electrical installation
5.6.1
Electrical installation procedure
Preliminary requirements
Procedure
1. Open the front and right doors. Refer to section
2. Connect the wires of the AC input cable. Refer to section
3. Connect the PE wire. Refer to section
4. Connect the enclosure to the earth. Refer to section
5. If it is necessary, connect the Ethernet cable. Refer to section
6. Close the doors. Refer to section
5.6.2
Connect the wires of the AC input cable
Preliminary requirements
30
Caution: Make sure that
there is no kink in the
cables.
•
1.
The front and right doors
are open.
•
Wire stripper pliers
•
Wire end ring tool
•
Torque socket wrench
4.2
. Make
6.1
5.6.3
.
6.2
.
•
•
•
.
5.6.2
.
5.6.4
.
5.6.5
.
Wire end rings M11
Fasteners M11
BCM.S1102.0-EN | 001
C
A
B