Storm-Control Flowcontrol; No Storm-Control Flowcontrol; Vlan - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Table 8-2. Broadcast Storm Recovery Thresholds
Link Speed
10M
100M
1000M
Format
Mode

storm-control flowcontrol

This command enables 802.3x flow control for the switch.
Note: This command only applies to full-duplex mode ports.
Default
Format
Mode

no storm-control flowcontrol

This command disables 802.3x flow control for the switch.
Note: This command only applies to full-duplex mode ports.
Format
Mode

vlan

This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
Mode
8-68
High
20
5
5
no switchconfig storm-control broadcast
Global Config
Disabled
storm-control flowcontrol
Global Config
no storm-control flowcontrol
Global Config
vlan <2-4094>
VLAN database
202-10009-01_060204
Low
10
2
2
Switching Commands