Set Prompt; Show Forwardingdb Agetime; Show Network - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

set prompt

This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
Format
Mode
Privileged EXEC

show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter
is required. In an SVL system, the [fdbid | all] parameter is not used and will be ignored if entered.
Default
Format
Mode
Forwarding DB ID
Agetime

show network

This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of
the switch's front panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front panel ports through which traffic is switched
or routed.
Format
Mode
8-22
no serial timeout
Line Config
set prompt <prompt string>
all
show forwardingdb agetime [fdbid | all]
Privileged EXEC
Fdbid (Forwarding database ID) indicates the forwarding data-
base whose aging timeout is to be shown. The all option is used to
display the aging timeouts associated with all forwarding data-
bases. This field displays the forwarding database ID in an IVL
system. This field will not be displayed in an SVL system.
Displays the address aging timeout for the associated forwarding
database in IVL. In an SVL system, this will display the system's
address aging timeout value in seconds.
show network
Privileged EXEC and User EXEC
202-10009-01_060204
Switching Commands