Show Snmptrap - NETGEAR ProSafe GSM7224 User Manual

Layer 2 managed switch software
Hide thumbs Also See for ProSafe GSM7224:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Six communities are supported. You can add, change, or delete communities. The switch does not
have to be reset for changes to take effect.
The SNMP agent of the switch complies with SNMP Version 1 (for more about the SNMP
specification, see the SNMP RFCs). The SNMP agent sends traps through TCP/IP to an external
SNMP manager based on the SNMP configuration (the trap receiver and other SNMP community
parameters).
Format
Mode
SNMP Community Name The community string to which this entry grants access. A valid
Client IP Address -
Client IP Mask -
Access Mode
Status

show snmptrap

This command displays SNMP trap receivers. Trap messages are sent across a network to an
SNMP Network Manager. These messages alert the manager to events occurring within the switch
or on the network. Six trap receivers are simultaneously supported.
Format
Mode
Switching Commands
show snmpcommunity
Privileged EXEC
entry is a case-sensitive alphanumeric string of up to 16 charac-
ters. Each row of this table must contain a unique community
name.
An IP address (or portion thereof) from which this device will
accept SNMP packets with the associated community. The
requesting entity's IP address is ANDed with the Subnet Mask
before being compared to the IP Address. Note: that if the Subnet
Mask is set to 0.0.0.0, an IP Address of 0.0.0.0 matches all IP
addresses. The default value is 0.0.0.0
A mask to be ANDed with the requesting entity's IP address
before comparison with IP Address. If the result matches with IP
Address then the address is an authenticated IP address. For
example, if the IP Address = 9.47.128.0 and the corresponding
Subnet Mask = 255.255.255.0 a range of incoming IP addresses
would match, i.e. the incoming IP Address could equal
9.47.128.0 - 9.47.128.255. The default value is 0.0.0.0
The access level for this community string.
The status of this community access entry.
show snmptrap
Privileged EXEC
202-10009-01_060204
8-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents