Vlan Protocol Group Add Protocol; No Vlan Protocol Group Add Protocol; Vlan Protocol Group Remove; Vlan Pvid - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Mode

vlan protocol group add protocol

This command adds the <protocol> to the protocol-based VLAN identified by <groupid>. A group
may have more than one protocol associated with it. Each interface and protocol combination can
only be associated with one group. If adding a protocol to a group causes any conflicts with
interfaces currently associated with the group, this command will fail and the protocol will not be
added to the group. The possible values for protocol are ip, arp, and ipx.
Default
Format
Mode

no vlan protocol group add protocol

This command removes the <protocol> from this protocol-based VLAN group that is identified by
this <groupid>. The possible values for protocol are ip, arp, and ipx.
Format
Mode

vlan protocol group remove

This command removes the protocol-based VLAN group that is identified by this <groupid>.
Format
Mode

vlan pvid

This command changes the VLAN ID per interface.
Default
Format
Mode
8-74
Global Config
none
vlan protocol group add protocol <groupid> <protocol>
Global Config
no vlan protocol group add protocol <groupid> <proto-
col>
Global Config
vlan protocol group remove <groupid>
Global Config
1
vlan pvid <1-4094>
Interface Config
202-10009-01_060204
Switching Commands