Clear Dot1X Statistics; Clear Radius Statistics; Dot1X Defaultlogin; Dot1X Initialize - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.
Format
Mode

clear radius statistics

This command is used to clear all RADIUS statistics.
Format
Mode

dot1x defaultlogin

This command assigns the authentication login list to use for non-configured users for 802.1x port
security. This setting is over-ridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Format
Mode

dot1x initialize

This command begins the initialization sequence on the specified port. This command is only valid
if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.
Format
Mode
8-94
no authentication login <listname>
Global Config
clear dot1x statistics {<slot/port> | all}
Privileged EXEC
clear radius statistics
Privileged EXEC
dot1x defaultlogin <listname>
Global Config
dot1x initialize <slot/port>
Privileged EXEC
202-10009-01_060204
Switching Commands