NETGEAR ProSafe GSM7224 User Manual page 190

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
Switching config port physicalmode <slot/port
| all> <100h | 100f | 10h | 10f>
Switching config port lacpmode <slot/port/all>
<enable/disable>
Switching config port autoneg <slot/port/all>
<enable/disable>
Switching config lag create <name>
Switching config lag addport <logical slot/
port> <slot/port>
Switching config lag deleteport <logical slot/
port> <slot/port | all>
A-14
CLI Command
Mode
Global
Config
Global
Config
Interface
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
202-10009-01_060204
Syntax
snmp trap link- status all
no snmp trap link- status all
speed {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
speed all {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
port lacpmode
no port lacpmode
port lacpmode all
no port lacpmode all
auto-negotiate
no auto-negotiate
auto-negotiate all
no auto-negotiate all
port-channel <name>
addport <logical slot/port>
deleteport <logical slot/port>
IS CLI Mapping