NETGEAR ProSafe GSM7224 User Manual page 128

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode
Bridge Priority
Bridge Identifier
Time Since Topology Change in seconds
Topology Change Count Number of times changed.
Topology Change
Designated Root
Root Path Cost
Root Port Identifier
Root Port Max Age
Root Port Bridge Forward Delay Derived value
Hello Time
Bridge Hold Time
CST Regional Root
Regional Root Path Cost
Associated FIDs
Associated VLANs
When the "brief" optional parameter is included, this command displays spanning tree settings for
the bridge. In this case, the following details are displayed.
Bridge Priority
Bridge Identifier
Bridge Max Age
Bridge Hello Time
Bridge Forward Delay
Bridge Hold Time
8-76
show spanning-tree [brief]
Privileged EXEC and User EXEC
Configured value.
Boolean value of the Topology Change parameter for the switch
indicating if a topology change is in progress on any port
assigned to the common and internal spanning tree.
Value of the Root Path Cost parameter for the common and inter-
nal spanning tree.
Derived value
Configured value
Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs)
List of forwarding database identifiers currently associated with
this instance.
List of VLAN IDs currenty associated with this instance.
Configured value.
TConfigured value.
Configured value.
Configured value.
Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs)
202-10009-01_060204
Switching Commands