Mtu; No Mtu; Network Javamode; No Network Javamode - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

mtu

This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-
channel (LAG) interfaces. For the standard implementation, the range of <mtusize> is a valid
integer between 1522-9216.
Default
Format
Mode

no mtu

This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.
Format
Mode

network javamode

This command specifies whether or not the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
Default
Format
Mode

no network javamode

This command disallows access to the Java applet in the header frame of the Web interface. When
access is disabled, the user cannot view the Java applet.
Format
Mode

network mac-address

This command sets locally administered MAC addresses. The following rules apply:
8-18
1522
mtu <1522-9216>
Interface Config
no mtu
Interface Config
Enabled
network javamode
Privileged EXEC
no network javamode
Privileged EXEC
202-10009-01_060204
Switching Commands