Table of Contents
Advertisement
Assembly process No.
A-2
1. Put blocks (400 mm) under the track shoe
grousers on the front side of the machine.
2. Lift up the end of the track shoes (master links)
on the rear side of the machine and mesh
them with the sprocket teeth and move the
machine slowly forward to install the track
shoes.
3. Mesh the master links and clamp them and
shoe plates with the bolts.
a Place the master link at the upper part of
idler.
a Tighten the all 4 shoe bolts with the fingers
until the contact surfaces of the master link
are fitted.
a If the shoe bolts are tightened forcibly
before the contact surfaces of the master
link are fitted, the threads of them and
master link may be damaged.
4. Tighten the shoe bolts for the master link in the
order shown at right.
2 Shoe bolt:
Anti-seizure agent LM-P
(Maruzen Morimax No. 2 or equiva-
lent)
3 Shoe bolt:
1st time: 590 ± 60 Nm {60 ± 6 kgm}
2nd thime: Retighten by 180 ° ± 10 °.
a Install the other side of track shoe in the
order shown above.
Precautions
Installing track shoes
Track choe
Necessary tools
Name
Other remarks
21
Track choe
Master link
Necessary equipment
Q'ty
Name
Q'ty
Advertisement
Table of Contents
