Assembly process No.
S-2
(3) Installation of antenna
Referring to Fig. 3, remove the cap. (Discard the removed cap.)
•
Referring to the detailed view in Fig. 3, remove the paint in the hatched area.
•
Pass wiring harness (5) through hole (K) and pass GPS wiring harness (6) through hole (L).
Install grommet (10) to bracket (9).
•
Referring to Fig. 4, install antenna (4) to bracket (9).
Install GPS (6) to the top of bracket (9).
•
Fix bracket (9) to (M) with bolt and washer (8).
•
Connect wiring harness (5) to antenna (4).
Apply LOCTITE to
connecting parts of antenna
(4) and wiring harness (5).
Installation of KOMTRAX parts (3/6)
Fig. 3 Removal of cap
(7), (8) and (9) are
made transparent to
show inside.
Fig. 4 Installation of antenna
68
Seal around
grommet.
No. Loose-supply items Q'ty
4
8A13-10-2100
5
8A13-10-2200
6
8A13-10-4300
7
17A-979-3970
8
01024-D0850
9
17A-979-3960
10
175-06-81610
1
1
1
1
2
1
2